電生理工作站是一款多功能細胞外記錄終端。以精致和實用性為設計理念為研究人員提供了一個強大的電子數據記錄工具。配合控制軟件neuro-Guide使用ARIS可以為您提供了體內電生理學*的工作站。將電極連接到系統上即可開始您的電生理學實驗。
電生理工作站ARIS具備兩個獨立的操作模式:電腦模式和手動模式。包括下列硬件單元放大器、放大器、過濾器、刺激發生器、阻抗測量、數據采集模塊。
電生理工作站ARIS的主要特征:
4通道記錄系統
集成探頭
Spikes局部場電位（LFP）
微硬盤
數據采集
Spike Sorting
圖譜集成
ARIS – Electrophysiology Workstation
ARIS is a multifunctional hardware solution for extracellular recording. It was designed with compactness and utility in mind to offer the researchers a powerful electronic tool.
ARIS offers a state-of-the-art workstation for in-vivo electrophysiology.
All in one
- Amplification, conditioning and acquisition of neuronal signals
- Programmable current stimulus generator
- Impedance measurement module
ARIS perfectly integrates in a computerized laboratory setting, and can also be used only as a companion tool in a hardware-exclusive recording or stimulation arrangement. Accordingly, it offers two independent operation modesPC-Control and Manual.
ARIS incorporates even the preamplifier module and connects directly to a laptop or desktop computer.
Computer controlled electrophysiology research
This equipment was designed especially for optimal amplification and acquisition of extracellular neuronal signalssingle-unit potentials (2 channels) and local field potentials (2 channels). The integrated data card ensures full computer controlchannel selection, switching of operation modes (recording, stimulation, impedance), programmable generation of stimulus waveforms of amplitudes up to 1mA @ 250V.
Clean signal
The differential input recording channels were designed with care to guarantee maximal immunity to environmental noise. The steep response of the 4th order low-pass and high-pass filters were optimally pre-tuned to ensure a virtually hands-free operation.
Direct impedance test
Measurement of microelectrode impedances up to 2MW is realized on-the-fly based on the voltage feedback of the 1nA sinusoidal signal sent to the preparation.
Computer controlled stimulation current
The stimulation current is precisely generated by the data card with no additional processing burden on the connected computer. Repetitive current pulse trains or lesioning/marking constant current are supported.
No cable reconnection
ARIS is capable of no-electrode-touch switching of operation modesrecording, stimulation, impedance testing. That is, the same preparation cable remains in place during the entire experiment.
Fully computer controlled or stand-alone
When operated through your laptop or desktop computer via the neuro-Guide software, ARIS employs not more than three connectors and cables (preparation connections and computer connection), and no other frontal panel auxiliaries. Actually, ARIS was designed for full flexibility, being able to operate in two independent modes“PC-Control”, and “Manual”. Switching from Manual to PC-Control is realized automatically when the computer cable is connected, and this condition is indicated by a frontal LED. This allows reusing your existing laboratory equipment in various combinations, for instance:
- transforming an external TTL signal into a stimulation current deliverable by ARIS,
- using ARIS as a programmable stimulus generator only,
- using ARIS for signal amplification and conditioning only,
- generating lesioning/marking current directly from ARIS’s frontal panel, etc.
3007536621
