Lufft (產品)

Snow Depth Sensor SHM31

The laser-based snow depth sensor Lufft SHM31 stands for millimeter-accurate snow level detection over long distances in all weather conditions without any maintenance, due to opto-electronic/laser based rangefinder technology.

毫米級精度的激光雪深儀，

長距離探測，范圍達30，

可探測各種反射表面，

探測雪深厚度15米，

探測速度數據獲取極快（幾秒量級）

全天候，

免維護，

Millimeter-accurate snow levels in all weather conditions: The SHM 31 operates with a visible, easy-to-measure measuring beam. The snow depth is given up to 15 meters within seconds, millimeter-accurate and reliable. Various heating functions significantly extend the lifetime of the laser diode and allow high-quality measurement data in all weather conditions. Regular maintenance becomes redundant with the SHM 31. A very robust housing and an elaborate operation principle allows almost no maintenance work throughout the lifetime of the sensor.

• 雪深測量
• Parameters measured:Snow depth
• 光電探測技術 ，人眼安全
• Measurement technology:opto-electronic measuring technique (rangefinder; laser distance sensor) with eye-safe laser
• 遠距，可加熱，傾斜自動補償，安裝簡單
• Product highlights:Determination of snow depth over long distances, heating options allow high quality measurements in all weather conditions, simplified installation due to automatic inclination angle compensation
• 接口多，多系統兼容
• Interfaces:RS485 & RS232 with UMB, UMB-ASCII 2.0 & SDI12 protocol

• Measurement of millimeter-accurate snow levels over long distances
• Various heating functions significantly extend the lifetime of the laser diode and allow high-quality measurement data in all weather conditions
• Compact and weatherproof housing
• Built-in automatic angle meter allows simplified installation.
• Effective suppression of scattered light
• Differentiation between snow and other natural surfaces
• Optical measuring method is independent of temperature or wind fluctuations ａnd thus offers a great advantage over conventional ultrasonic sensors
• Maintenance-free operation: no calibration or exchange of desiccant

重要參數

與前型號SHM30的區別？

What are the main differences of the Lufft SHM31 compared to the Lufft SHM 30?

Both the extended heating function and the improved design of the laser diode (particularly the laser output) increase the resistance and performance of the sensor in extreme weather conditions, e.g. in severe snow storms or during sudden extreme cold snaps.

新型號：

更節能，低電流；

激光輸出配置了加熱器，

內置傾斜角度自動補償計

增加了RS-485 和 SDI-12 接口，

包含了Lufft UMB協議

New features are, in particular, an energy-saving low-current operation for idle phases, an additional window heater for the laser output, and a built-in automatic angle meter, which allows simplified installation.

Furthermore, the communication interface has been adapted to enable RS-485 and SDI-12 operation. The Lufft UMB Protocol has been included, too.

The SHM31 is based on an opto-electronic laser distance sensor and operates with a visible, easy-to-measure measuring beam. Distances of up to 30 meters to natural, diffuse reflective surfaces are measured very precisely.

The snow depth is given up to 15 meters within seconds, millimeter-accurate and reliable. An additional function as a ground-snow detector is provided by the signal intensity.

The optical measuring method is independent of temperature fluctuations and thus offers a great advantage over conventional ultrasonic sensors. Temporary impairments of the measuring process, for example by precipitation, are compensated by the operating mode.

Another major benefit is that regular maintenance becomes redundant with the SHM31. A very robust housing and an elaborate operation principle allow almost no maintenance work throughout the lifetime of the sensor. No special interventions like frequent replacements of desiccant or regular calibration are needed.