美國uvp公司生產的B-100AP高強度紫外燈為100W長波紫外線燈，高強度抗沖擊外殼由有Cool-Touch阻熱材料制造，可長時間工作不產生高溫。B-100AP高強度紫外線燈-100瓦365nm紫外燈，其的設計可以應用在汽車行業中，用來檢測發動機泄露，GFP熒光檢測，礦物學研究等也有應用。B-100AP高強度紫外燈訂貨編號：95-0127-01（110v），95-0127-02（220v）
B-100AP高強度紫外線燈是美國美國UVP公司生產的一款便攜式高強度黑光燈。美國UVP公司被德國AnalytikJena公司收購后現在為AnalytikJena Blak-Ray B-100A UV Lamp。美國uvp公司生產的B-100AP高強度紫外燈為100W長波紫外線燈，高強度抗沖擊外殼由有Cool-Touch阻熱材料制造，可長時間工作不產生高溫。B-100AP高強度紫外線燈-100瓦365nm紫外燈，其的設計可以應用在汽車行業中，用來檢測發動機泄露，GFP熒光檢測，礦物學研究等也有應用。
B-100AP系列高強度紫外燈為100W長波紫外線燈，高強度抗沖擊外殼由有Cool-Touch阻熱材料制造，可長時間工作不產生高溫。
B-100AP高強度紫外線燈-100瓦365nm紫外燈，其的設計可以應用在汽車行業中，用來檢測設計漏洞，在線路搭乘制造，礦物學研究等也有應用。
? 功率為100W
? 在380mm處紫外線強度為5,000uW/cm2
? 燈泡的壽命約為500小時。
? 燈頭連接到鎮流器（除B-100SP）允許燈頭360°旋轉
? 在457mm距離處，可產生大約直徑127mm的高強度紫外光斑
B-100系列燈有多種型號選擇：所有“P”系列燈都具有Cool-Touch阻熱材料外殼，沒有高溫產生，無論使用多長時間燈頭溫度可以手持，可以面朝下放置在工作臺也不會損壞。非“P”系列的是鋁合金外殼。
B-100AP型號的特點為100瓦長波紫外線燈，Cool-Touch阻熱外殼。在457mm距離處，可產生大約直徑127mm的高強度紫外光斑，燈頭可旋轉360度，2.4米的電源線。為增加流動性，可選擇B-100AP/R包括6.1米長的電源線。B-100AP被廣泛的應用在無損檢測和熒光檢測。
B-100A和A-100AR
B-100A的特點為100W的長波紫外線燈，B-100A防刮鋁合金外殼，2.4米電源線。為了增加流動性，選擇B-100AR包括6.1米長的電源線。應用非破壞性測試和熒光檢測。
型號描述貨號
B-100A100W，高強度長波紫外燈，230V, 95-0044-02
B-100A/R100W，高強度長波紫外燈，6.1米電源線，115V, 95-0044-04
B-100AP100W，高強度長波紫外燈，Cool-Touch阻熱外殼，230V, 95-0127-02
B-100AP/R100W，高強度長波紫外燈，Cool-Touch阻熱外殼，6.1米電源線，230V, 95-0127-07
B-100SP140W，高強度長波紫外燈，Cool-Touch阻熱外殼，115VN/A
B-100Y100W，高強度表面晶粒檢查燈，黃光，230V, 95-0044-18
B-100YP100W，高強度表面晶粒檢查燈，Cool-Touch阻熱外殼，黃光，115V, 95-0127-04
貨號 | 描述 |
89-0068-01 | Finger Guard for B-100AP, B-100AP/R |
19-0126-01 | Lamp Funnel for B-100AP, B-100AP/R, B-100SP |
19-0125-01 | B-100AP, B-100AP/R, B-100SP燈罩 |
19-0124-01 | B-100A, B-100AR燈罩 |
76-0055-01 | B-100AP, B-100AP/R, B-100YP, B-100SP曝光盒 |
19-0158-01 | Lamp Guard B-100A, B-100AR |
34-0054-01 | 100W備用燈泡 |
34-0049-01 | Bulb, Self Ballasted B-100SP |
38-0009-02 | Filter for B-100Y and B-100YP |
1.B-100AP高強度紫外燈無法開啟怎么辦？
更換燈泡，如果更換燈泡仍然無法啟動，請檢查電源線是否破損，用數字萬用表測量電源插頭到主機箱接頭是否導通，如果線路沒有問題，那就需要更換啟動變壓器。
2.如何更換B-100AP燈泡？
更換燈泡時請務必先關閉電源，將電源線從插座拔下，等燈頭表面溫度降低到常溫時才可以操作。用雙手將B-100ap燈頭保護罩上2個黑色按鈕按下，取下保護罩，然后按壓燈頭兩邊的按鈕，取下濾光片，用手輕輕逆時針旋下燈泡，因此100w燈泡為高壓汞燈，里面含有大量金屬汞，切勿將廢棄的燈泡隨意丟棄，請將燈泡按照有害垃圾交給相關企業回收處理。
3. B-100AP啟動變壓器損害了怎么辦？
如果確定啟動變壓器損壞，請將主機和燈頭一起快遞到我公司的售后維修部，我公司收到后會先做一個維修評估，評估報告經您確認后，我們大約7-10天維修好。
4. B-100AP濾色片破裂了還能繼續使用嗎？
B-100AP紫外線燈的濾色片是將320nm以下和400nm以上的波段過濾掉，如果破裂了會有短波UVC和中波UVB波段的紫外線輻照出來，對照射的物體和操作人員都有危害，所以，如果發現濾色片破損，請及時更換濾色片。
5. B-100AP高強度紫外線燈為什么啟動那么慢？
B-100AP為高壓汞燈，高壓汞燈啟動時間為5-10分鐘，關閉后如果再啟動仍然需要再等待5-10分鐘，請勿頻繁開關機。
6. 在哪可以購買到B-100AP的紫外線燈泡和濾色片？
如果需要B-100AP的紫外線燈泡和濾色片，請聯系上海路陽生物技術有限公司的銷售客服。
7.操作B-100AP的紫外線燈需要注意什么？
B-100AP的紫外線燈為高強度紫外線燈，因強烈紫外線人的肉眼無法識別，但對人的眼睛傷害特別大，所以，操作時請務必佩戴專業的紫外線防護眼鏡，推薦使用LUV-10A紫外線防護眼鏡。因B-100AP的紫外線燈點亮30分鐘左右燈頭表面達到熱平衡，表面溫度大約在150-200攝氏度，如果無意觸碰到，會造成皮膚燙傷。
8. B-100AP的紫外線燈照射時對環境有什么要求？
電源電壓需要穩定在220v，周圍沒有易燃物，保持好環境通風，照射時操作人員時刻注意被照射物體表面變化，切勿遠離。周圍盡量不要有無關人員，必須在照射現場的人員，佩戴好紫外線防護眼鏡，請勿將皮膚裸露在外面。
B-100AP的紫外線燈的操作說明書下載：
UVP B-100AP的紫外線燈的操作說明書
B-100 Series Ultraviolet Lamps Operating Instructions
B-100AP HIGH INTENSITY UV LAMPS
The Blak-Ray B-100 Series high powered UV lamps offer brilliant irradiance for optimum fluorescence. B-100AP lamp (n) is placed in the transformer base for hands-free operation.
Applications
? Fluorescence Inspections
? Non Destructive Testing
? Leak Detection
? Readmission
? UV Applications Notes
? UV Application List
MAIN FEATURES
The B-100 Series lamps are available in a variety of styles: All "P" series lamps come with the special heat-resistant plastic Cool-TouchTM housing which allows users to handle the lamp head regardless of how long the lamp has been operating. These rugged lamps can be placed face down on a working surface without damage to the filter. The non "P" models are built with an aluminum lamp head.
A 100 watt spot bulb is standard with all models (except the B-100SP); the bulb is rated at 5000 hours.
Self-ballasted bulb included with the B-100SP has an average life of 450 to 2000 hours depending on use patterns
The lamp head connects to the transformer base for hands free use (all models except B-100SP) allowing the lamp head to rotate a full 360°; remove the lamp from the base for additional mobility
B-100AP and B-100AP/R
B-100AP models feature 100 watt longwave UV, Cool-Touch housing and ballast base. At 18 in. (457 mm), the lamp produces a highly intense center of UV irradiance about 5 in. (127 mm) in diameter. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. For added mobility, select the B-100AP/R which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
B-100A and A-100AR
The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included. The 100 watt longwave UV bulb is excellent for inspection applications. For increased mobility, select the B-100AR which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
B-100SP
This 90 watt longwave, self-ballasted lamp is a highly portable, high intensity lamp for automotive leak detection applications. The ballast is built directly into the bulb. The B-100SP features the Cool-Touch housing and an 8 ft. (2.44m) cord.
B-100Y and B-100YP
These models feature a yellow filter which blocks wavelengths shorter than 500nm and produces three strong mercury lines at 543, 574 and 576nm. The high contrast light is produced for fine surface particle detection. Particles down to 10 microns are routinely visible with this lamp. B-100Y is built with the aluminum housing; B-100YP with a plastic housing. These lamps are excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450nm.
| UV Source: | 365nm Longwave UV | |
| Watts: | 100 Watts (All Models Except B-100SP Which Is 90 Watts) | |
| Filters: | B-100Y And B-100YP Include A Yellow Filter | |
| Dimensions: | B-100A: | Lamp Head 8.5D X 5.5Dia. In. (216 X 140mm) Weight: 11.72lb (5.33kg) Cord Length: 8 Ft. (2.44m) |
| B-100AR: | Lamp Head 8.5D X 5.5Dia. In. (216 X 140mm) Weight: 11.72lb (5.33kg) ,Cord Length: 20 Ft. Primary And Secondary | |
| B-100AP: | Lamp Head 9.75D X 6Dia In. (248 X 152mm) Weight: 12.5lb. (5.6kg) ,Cord Length: 8 Ft. (2.44m) | |
| B-100AP/R: | Lamp Head 9.75D X 6Dia In. (248 X 152mm) Weight: 12.5lb. (5.6kg) , Cord Length: 20 Ft. Primary And Secondary | |
| B-100SP: | Lamp Head 9.75D X 6Dia. In. (248 X 152mm) Weight: 3.14lb. (1.43kg) ,Cord Length: 8 Ft. (2.44m) | |
| B-100Y: | Lamp Head 8.5D X 5.5Dia. In. (216 X 140mm) Weight: 11.72lb (5.33kg) Cord Length: 8 Ft. (2.44m) | |
| B-100YP: | Lamp Head 9.75D X 6Dia In. (248 X 152mm) Weight: 12.5lb. (5.67kg) Cord Length: 8 Ft. (2.44m) | |
ORDERING INFORMATION
Part Numbers
| 115V | 230V | Model | Description | Intensity 2"/10"(uW/cm2) |
| 95-0044-22 | 95-0044-02 | B-100A | Longwave UV Lamp, 230 Volts | 21,700/8,900 |
| 95-0044-03 | 95-0044-04 | B-100A/R | Longwave UV Lamp 20 ft. cords, 115 Volts | 21,700/8,900 |
| 95-0127-01 | 95-0127-02 | B-100AP | High Intensity 100 Watt Longwave UV Lamp, Cool-Touch Housing, 230 Volts | 21,700/8,900 |
| 95-0127-06 | 95-0127-07 | B-100AP/R | High Intensity 100 Watt Longwave UV Lamp 20 ft cords, Cool-Touch Housing, 230 Volts | 21,700/8,900 |
| 95-0128-01 | N/A | B-100SP | 90 Watt Longwave UV Lamp, Cool-Touch Housing, 115 Volts | 8,500/1,800 |
| 95-0044-24 | 95-0044-18 | B-100Y | High Intensity Wafer Inspection Lamp, Yellow Filter, 230 Volts | |
| 95-0127-03 | 95-0127-04 | B-100YP | High Intensity Wafer Inspection Lamp, Yellow Filter, 100 Watt, Cool-Touch Housing, 115 Volts | |
| 89-0068-01 | Finger Guard for B-100AP, B-100AP/R | |||
| 19-0126-01 | Lamp Funnel for B-100AP, B-100AP/R, B-100SP | |||
| 19-0125-01 | Lamp Visor B-100AP, B-100AP/R, B-100SP | |||
| 19-0124-01 | Lamp Visor for B-100A, B-100AR | |||
| 76-0055-01 | Exposure Box for B-100AP, B-100AP/R, B-100YP, B-100SP | |||
| 19-0158-01 | Lamp Guard B-100A, B-100AR | |||
| 34-0054-01 | Bulb, Spot | |||
| 34-0049-01 | Bulb, Self Ballasted B-100SP | |||
| 38-0009-02 | Filter for B-100Y and B-100YP | |||
美國UVP公司介紹：
美國UVP公司從1932年開始生產供科研、工業及教育應用的紫外透照燈、紫外手燈等一系列實驗室用紫外成像設備，成為紫外影像技術方面的。從1989年開始，UVP為科學家們推出了成套的凝膠圖像分析系統，廣為各大實驗室采用。經過多年的應用檢驗，廠家的不斷改進完善，UVP的凝膠圖像分析系統以其緊湊的設計，方便的操作，強大的分析軟件及低值的運行成本，更高的靈敏度，更完善且全面的功能，成為當今世界多的凝膠圖像分析系統。
2013年4月2日 德國耶拿分析儀器股份公司（Analytik Jena）宣布收購了美國成像公司UVP及其歐洲全資子公司Ultra-Violet Products，旨在進一步擴大生命科學業務的產品線，并加強在美洲的業務。
B-100AP高強度紫外燈訂貨編號：95-0127-01（110v），95-0127-02（220v）
*您想獲取產品的資料：
個人信息：
