致茂電子推出太陽電池陣列模擬電源，型號62000H-S系列提供可模擬太陽電池陣列的開路電壓（Voc）達1...
致茂電子推出太陽電池陣列模擬電源，型號62000H-S系列提供可模擬太陽電池陣列的開路電壓（Voc）達1800V及短路電流（Isc）達30A于3U高電源模塊，且具有響應快速之設計以模擬太陽電池的輸出I-V曲線，此可應用于光伏逆變器、微逆變器及太陽能充電器的功率追蹤（MPPT）效能測試。
此62000H-S系列具有高速100k Hz的數字化資料擷取連續量測線路及數碼濾波機制，及高速25kHz的D/A控制，此可精準地模擬I-V曲線，并且可響應光伏逆變器的拉載市電漣波效應于I-V曲線模擬時，單機內建EN50530 & Sandia太陽電池數學模型，使用者可簡單地于單機前面板設定太陽電池I-V特性（Voc/Isc/Vmp/Imp）后輸出一模擬太陽電池陣列I-V曲線予光伏逆變器測試其靜態MPPT性能。
另外實際太陽電池（Solar Array）陣列會因天候如照度、溫度、云遮或下雨而影響輸出I-V曲線，此62000H-S系列單機可讓使用者儲存100條I-V曲線，且可設定每條曲線欲執行輸出時間，此可讓使用者測試光伏逆變器于不同地區下天候條件的長時間功率追蹤性能。
62000H-S系列具備16bit高分辨率的數碼控制及精準的電壓及電流量測機制，并搭配圖形化操作軟件（Softpanel），此可實時地測試及顯示光伏逆變器的功率追蹤狀況，且測試MPPT EFF%讀值，另外使用者可選擇欲儲存的量測讀值于軟體上。
大功率太陽電池陣列模擬需求于商業用及發電站用光伏逆變器測試時，使用者可簡單地并聯方式連接二臺或多臺電源模塊以整合為1.5MW系統。62000H-S系列電源供應器具有主/從并聯控制模式達16臺288kW輸出，使并聯操作模式快速又簡易，在此模式中，使用者只需透過前面板或遠端數碼控制主（Master unit）單機，系統會自動將設定數值下載資料到從屬（Slave unit）單機，具有高速同步訊號控制處理，且系統具有自動均流控制。
62 000 H-S系列直流電源供應器操作非常簡單，從前面板按鍵或遠端控制器經由Ethernet/ USB/RS232/RS485/GPIB/APG控制界面。其具有3U精巧尺寸，可毫無困難的以標準機架堆棧于機臺上。
交流輸入電壓范圍：200/220Vac，380/400Vac，440/480Vac
3U/18kW高功率密度模塊可簡易主/從并聯
太陽電池陣列模擬I-V功能（內建EN50530 & Sandia之I-V曲線數學式）
可模擬多種太陽電池的輸出特性（Fill Factor）
可模擬不同溫度及照度下的I-V曲線
具有非常小的Leakage Current（<3mA）
精準的電壓及電流量測
可模擬太陽面板掩碼下I-V曲線（可達4096點）
具有100條I-V曲線自動編程控制
可測試Static & Dynamic MPPT性能（能量積分量測）
可模擬各地區實際天候（天/月/年）I-V曲線
具有資料記錄于Softpanel
支持Ethernet / USB / RS232 / RS485 / GPIB / APG控制界面
實時的功率追蹤狀態顯示于Softpanel
具有圖形化操作軟件Softpanel
可支持控制10臺太陽電池電源于多信道MPPT測試
具EN50530、Sandia、CGC/GF004、CGC/GF035、NB/T 32004動態MPPT測試程序及報表生成功能
電氣規格表-太陽電池陣列模擬電源機種
| Model | 62020H-150S | 62050H-600S | 62100H-600S | 62150H-600S | 62150H-1000S | 62180H-1800S |
| Output Ratings | ||||||
| Output Voltage | 0 ~ 150V | 0 ~ 600V | 0 ~ 600V | 0 ~ 600V | 0 ~ 1000V | 0 ~ 1800V *5 |
| Output Current | 0 ~ 40A | 0 ~ 8.5A | 0 ~ 17A | 0 ~ 25A | 0 ~ 15A | 0 ~ 30A |
| Output Power | 2000W | 5000W | 10000W | 15000W | 15000W | 18000W |
| Line Regulation | ||||||
| Voltage | ± 0.01% F.S. | ± 0.01% F.S. | ||||
| Current | ± 0.05% F.S. | ± 0.05% F.S. | ||||
| Load Regulation | ||||||
| Voltage | ± 0.05% F.S. | ± 0.05% F.S. | ||||
| Current | ± 0.1% F.S. | ± 0.2% F.S. | ||||
| Voltage Measurement | ||||||
| Range | 60V / 150V | 120V / 600V | 120V / 600V | 120V / 600V | 200V / 1000V | 1100V / 1800V |
| Accuracy | 0.05% + 0.05%F.S. | |||||
| Current Measurement | ||||||
| Range | 16A / 40A | 3.4A / 8.5A | 6.8A / 17A | 10A / 25A | 6A / 15A | 15A / 30A |
| Accuracy | 0.1% + 0.1%F.S. | |||||
| Output Noise&Ripple | ||||||
| Voltage Noise(P-P) | 450 mV | 1500 mV | 1500 mV | 1500 mV | 2550 mV | 3500 mV |
| Voltage Ripple(rms) | 65 mV | 650 mV | 650 mV | 650 mV | 1950 mV | 750 mV |
| Current Ripple(rms) | 80 mA | 150 mA | 300 mA | 450 mA | 270mA | 250mA |
| OVP Adjustment Range | ||||||
| Range | 0 ~ 110% programmable from front panel, remote digital inputs. | |||||
| Accuracy | ±1% of full-scale output | |||||
| Programming Response Time | ||||||
| Rise Time: 50%F.S. CC Load | 10ms (6.66A loading) | 30ms | 30ms | 30ms | 25ms | 90ms |
| Rise Time: No Load | 10ms | 30ms | 30ms | 30ms | 25ms | 90ms |
| Fall Time: 50%F.S. CC Load | 10ms (6.66A loading) | 30ms | 30ms | 30ms | 25ms | 90ms |
| Fall Time: 10%F.S. CC Load | 83ms (1.33A loading) | 100ms | 100ms | 100ms | 80ms | 625ms |
| Fall Time: No Load | 300ms | 1.2s | 1.2s | 1.2s | 3s | 2.5s |
| Slew Rate Control | ||||||
| Voltage Slew Rate Range | 0.001V/ms ~ 15V/ms | 0.001V/ms ~ 20V/ms | 0.001V/ms ~ 20V/ms | 0.001V/ms ~ 20V/ms | 0.001V/ms ~ 40V/ms | 0.001V/ms ~ 20V/ms |
| Current Slew Rate Range | 0.001A/ms ~ 1A/ms, or INF | 0.001A/ms ~ 0.1A/ms, or INF | 0.001A/ms ~ 0.1A/ms, or INF | 0.001A/ms ~ 0.1A/ms, or INF | 0.001A/ms ~ 0.1A/ms, or INF | 0.001A/ms ~ 0.1A/ms, or INF |
| Minimum Transition Time | 0.5ms | |||||
| Transient response time | Recovers within 1ms to ± 0.75% of steady-state output | 1.5ms *4 | ||||
| for a 50% to 99% or 99% to 50% load change (1A/us) | ||||||
| Ef?ciency | 0.77(Typical) | 0.87(Typical) | 0.9(Typical) | |||
| Programming & Measurement Resolution | ||||||
| Voltage (Front Panel) | 10 mV | 10 mV | 10 mV | 10 mV | 100mV | 100mV |
| Current (Front Panel) | 1mA | 1mA | 1mA | 1mA | 1mA | 10mA |
| Voltage (Digital Interface) | 0.002% of Vmax | |||||
| Current (Digital Interface) | 0.002% of Imax | |||||
| Voltage (Analog Interface) | 0.04% of Vmax | |||||
| Current (Analog Interface) | 0.04% of Imax | |||||
| Programming Accuracy | ||||||
| Voltage (Front Panel ａnd Digital Interface) | 0.1% of Vmax | |||||
| Current (Front Panel ａnd Digital Interface) | 0.3% of Imax | 0.2% of Imax | ||||
| Voltage (Analog Interface) | 0.2% of Vmax | |||||
| Current (Analog Interface) | 0.3% of Imax | |||||
| Parallel Operation*2 | Master / Slave control via CAN for 10 units up to 150kW *1 (Parallel: ten units ) | up to 288kW *3 | ||||
| Auto Sequencing (I-V program) | ||||||
| Number of program | 10 | |||||
| Number of sequence | 100 | |||||
| Dwell time Range | 1s ~ 15,000S | |||||
| Trig. Source | Manual / Auto | |||||
一般規格表
| Model | 62020H-150S | 62050H-600S | 62100H-600S | 62150H-600S | 62150H-1000S | 62180H-1800S | |
| Remote Interface | |||||||
| Analog programming | Standard | ||||||
| USB | Standard | ||||||
| RS232 | Standard | ||||||
| RS485 | Standard | ||||||
| GPIB | Optional | ||||||
| System bus(CAN) | Standard for master/slave control | ||||||
| Ethernet | Optional | Standard | |||||
| GPIB Commａnd Response Time | |||||||
| Vout setting | GPIB send commａnd to DC source receiver <20ms | ||||||
| Measure V&I | Under GPIB command using Measure <25ms | ||||||
| Analog Interface (I/O) * | |||||||
| Voltage and Current Programming Inputs (I/P) | 0-10Vdc / 0 ~ 5Vdc / 0 ~ 5k ohm / 4 ~ 20 mA of F.S. | ||||||
| Voltage and Current monitor output (O/P) | 0 ~ 10Vdc / 0 ~ 5Vdc / 4 ~ 20mA of F.S. | ||||||
| External ON/OFF (I/P) | TTL : Active Low or High (Selective) | ||||||
| DC_ON Signal (O/P) | Level by user de?ne ( Time delay = 1 ms at voltage slew rate of 10V/ms.) | ||||||
| CV or CC mode Indicator (O/P) | TTL Level High=CV mode ; TTL Level Low= CC mode | ||||||
| OTP Indicator (O/P) | TTL : Active Low | ||||||
| System Fault indicator(O/P) | TTL : Active Low | ||||||
| Auxiliary power supply(O/P) | Nominal supply voltage : 12Vdc / Maximum current sink capability : 10mA | ||||||
| Safety interlock(I/P) | Time accuracy: <100ms | ||||||
| Remote inhibit(I/P) | TTL : Active Low | ||||||
| Auto Sequencing(List Mode) | |||||||
| Number of program | 10 | ||||||
| Number of sequence | 100 | ||||||
| Dwell time Range | 5ms ~ 15000S | 1ms ~ 15000S | |||||
| Trig. Source | Manual / Auto / External | ||||||
| Auto Sequencing (Step Mode) | |||||||
| Start voltage | 0 to Full scale | ||||||
| End voltage | 0 to Full scale | ||||||
| Run time | 10ms ~ 99hours | 1ms ~ 99hours | |||||
| Input Specification | |||||||
| AC Input Volatage 3Phase, 3Wire+Ground | 1? 200~220Vac | 3? 200~220Vac ± 10% VLL ; 3? 380~400Vac ± 10% VLL ; | 3? 380~400Vac | ||||
| ± 10% VLN | 3? 440~480Vac ± 10% VLL | ± 10% VLL | |||||
| AC Frequency range | 47 ~ 63Hz | ||||||
| Max Current (each phase) | 200/220Vac | 15.2A | 39A | 69A | 93A | 93A | -- |
| 380/400Vac | -- | 22A | 37A | 50A | 50A | 37A | |
| 440/480Vac | -- | 19A | 32A | 44A | 44A | -- | |
| General Specification | |||||||
| Maximum Remote Sense Line Drop Compensation | 2% of full scale voltage per line (4% total) | 1% of full scale voltage per line (2% total) | |||||
| Operating Temperature Range | 0oC ~ 40oC | ||||||
| Storage Temperature Range | -40oC ~ +85oC | -25oC~+70oC | |||||
| Dimension (HxWxD) | 89x428x465 mm/ 3.5x16.85x16.73 inch | 132.8 x 428 x 610 mm / 5.23 x 16.85 x 24.02 inch | 132.8x428x660 mm/ 5.23x16.85x25.99 inch | ||||
| Weight | Approx. | Approx. | Approx. | Approx. | Approx. | Approx. | |
| 17 kg/37.44 lbs | 23 kg/55.70 lbs | 29 kg/63.88 lbs | 35 kg/77.09 lbs | 35 kg/77.09 lbs | 40 kg/88.19 lbs | ||
| Approval | CE | ||||||
|
|
|
|
|
|
*您想獲取產品的資料：
個人信息：
